Carbon storage technologies could boost revenues for pulp and paper producers: Fastmarkets research

European pulp mills can use carbon capture and storage (CCS) technologies to open a new and unexplored revenue stream, Fastmarkets analysts wrote in a new report, CCS Revenue Case for European Pulp Mills.

As European pulp mills continue to face tight margins and structural overcapacity, the report examines how producers will face future regulatory challenges related to compliance costs under the EU Emissions Trading System (ETS).

Carbon economists at Fastmarkets noted how free allocations and a low reliance on fossil fuels had largely benefited Europe’s pulp mills until now. Between 2008 and 2024, the top ten recipients of free allocations captured around €6 billion in surplus allowance value, while the sector overall had a net surplus of €4.5 billion.

But analysts are now expecting declining allocations and rising EU ETS compliance costs over the next five years. Furthermore, a directive, effective from 1 January 2026, is set to remove free allocations for mills with more than 95% biogenic CO2 emissions, resulting in around 40% of mills losing free allowances entirely, Fastmarkets estimates show.

The situation poses a paradox, where fossil emission-conscious mills are effectively the most affected.

Selling CO2, either as carbon removal credits (CCS) or for industrial use, could provide an additional revenue stream while reducing EU ETS obligations.

Why pulp mills are best suited for CCS retrofits and where they may not work

The report focuses on the deployment of CCS technologies in market pulp mills.

According to Fastmarkets carbon analysts, they are among the best positioned industrial sites for carbon capture due to the facilities’ structurally large amount of untaxed biogenic CO2 emissions — derived from burning biomass and their self-sufficiency — compared with integrated pulp mills.

Because integrated mills use most of the on-site generated steam to run paper drying processes, CCS technology would require additional steps.

While pulp mills are technically well-suited to CCS, the economics vary widely, with mills located far away from storage hubs, such as saline aquifers or depleted oil and gas reservoirs, facing relatively prohibitive costs, making CCS technologies only viable in the presence of nearby physical CO2 outlets, such as food and beverage facilities.

But for most of the facilities studied, CCS retrofits result in lower production costs when short transport distances are combined with rising EU ETS obligations.

Contact carbonsupport@fastmarkets.com for more information on Fastmarkets’ report. Or register to read a teaser sample of the report here.

What to read next
Tissue jumbo roll prices continued their upward trend in Europe during May, driven by rising input costs. Virgin fiber-based rolls increased by €20-30 per tonne, with similar hikes seen for recycled grades.
The Brazil carbon market is being built to do more than cut emissions. The government wants to turn low-carbon steel and aluminium into a trade advantage and position Brazilian green metals as the SBCE phases in.
A growing number of steelmakers across Latin America have received sustainability certifications and environmental recognitions in recent months, reflecting how the region is increasingly positioning itself within the global transition toward lower-emissions steelmaking – although questions still remain surrounding how commercially scalable and economically sustainable this transition will become.
Recent Middle Eastern tensions and a sharp drop in traffic through the Strait of Hormuz could present a major opportunity for Russian pulp producers.
Front-loading cleared roughly €820 million in CBAM liabilities before the definitive phase began. The pattern is unlikely to be a one-off as free allowances step down toward zero in 2034.
As US automotive OEMs localize supply chains and accelerate EV rollout, margin pressure is intensifying across steel, aluminium and battery inputs.