Clean, lean US steel sector hunts for green steel premium

The US steel industry’s preponderance of electric-arc furnace (EAF) capacity may be a double-edged sword when it comes to collecting green steel premiums, market sources have told Fastmarkets

By global standards, US steel is already pretty green – and pretty pricey. 

The American Iron and Steel Institute credits EAFs in its most recent industry profile with about 71% of US domestic steel production, compared with a 26% global average. 

A round-up of estimated greenhouse gas emissions from the top four US steelmakers – Cleveland-Cliffs, Nucor, Steel Dynamics Inc and US Steel –  from each company’s most recent sustainability report show a range of about 1.98 tonnes of carbon dioxide equivalent (CO2e) per 1 tonne of steel down to as low as 0.39 tonnes C02e per 1 tonne of steel, covering Scope 1 and 2 emissions, which are direct emissions generated by an entity or its subsidiaries and indirect emissions from energy used by an organization.

Scope 3 emissions are a little harder to pin down due varying definitions – most producers lump them in with raw material costs rather than assume the carbon emissions of heavy end-use emitters like automobiles.

Even there, however, at least one major producer – Steel Dynamics Inc – puts its Scope 1, 2 and 3 average emissions as low as 0.78 tonnes CO2e per 1 tonne of steel. The same sustainability report puts the global average around 1.91 tonnes CO2e per 1 tonne of steel, with the global blast furnace average at 2.33 C02e per 1 tonne of steel.

That cleanliness comes at a cost. Though environmental concerns are just one piece of the US price puzzle, they are partially reflected in the disparity between US, European and Asian prices. 

Fastmarkets’ daily steel hot-rolled coil index, fob mill US Midwest was last calculated at $38.97 per cwt ($779.40 per short ton) on Wednesday May 15. This is against a backdrop of sideways-to-stagnant prices.

In contrast, Fastmarkets calculated its daily steel hot-rolled coil index, domestic, exw Northern Europe at €641.83 per tonne ($632.91 per short ton) on Thursday May 16.

Likewise, Fastmarkets’ weekly price assessment for steel HRC import, cfr Vietnam was $550-555 per tonne ($498.95-508.02 per short ton) on May 10.

Fastmarkets currently publishes green steel differentials for these European and Asian HRC assessments. The European green differential works out to $147.92-246.53 per short ton, while the Asian differential works out to $185.07-308.44 per short ton.

In a simplistic and possibly coincidental view, the European HRC price subtracted from the US HRC price is roughly the value of the European green steel differential. 

When all steel is green, none is 

It’s tempting to say that buying US HRC in general is buying green steel, but the industry can’t be complacent if it wants to retain or grow that premium, according to Greenway Steel founder Randy Charles. 

“US-produced steel does represent global leading low emissions – for now,” he told Fastmarkets. “That will change rapidly in the EU given the incentive behind the ETS [Emissions Trading System] and carbon liability, as well as investments being made in new H2 technology.” 

Earlier this year, one steel mill executive told Fastmarkets that they wouldn’t be surprised if carbon emissions ultimately become another tool in the US’ protectionist toolbox, similar to the Carbon Border Adjustment Mechanism in place in the EU. 

Such a move would have bipartisan appeal, regardless of the victor in the US presidential election in November, the executive said. It would echo the 232 national security restrictions originally put in place by President Donald Trump – and maintained by President Joe Biden – and it would mollify environmental advocates and industrial concerns alike, as the US already has a leg-up on the green steel front. 

In that scenario, a prospective US green steel differential may actually go negative, as the carbon costs for higher-emission steel add up; it may be cheaper to buy green. 

A second executive likened the push for green steel to the bounty some states place on mercury switches, a once-common and toxic component of older cars being sent to the scrapyard. 

Some states paid a bounty per switch, incentivizing their removal. Some states still do. And some moved to a voluntary system that did away with bounties entirely, putting the cost of removal and reporting on the scrapyard. 

A carbon tax on steel would harm incentives to go green in search of higher profit and make it just another cost of doing business – a boon to a burden in just a few years, he said. 

Ultimately, green steel will come in two primary shades, worldwide, Charles said – relative and absolute.

“The absolute basis, and lowest footprint, will carry the highest premiums for end users wanting, or even needing, to decarbonize supply chains.” 

Discover how our suite of green steel prices can support your ‘green’ investment decisions while bringing transparency to the industry. Find out more.

Follow the low-carbon steel discussion and keep up-to-date with the developments influencing the decarbonization of the steel industry

What to read next
Fastmarkets has discontinued its price assessments for MB-STE 0438 steel rebar, domestic, exw India, and MB-STE-0433 steel billet, domestic, exw India on December 10.
The following prices were affected: MB-STE-0892 – Steel hot-rolled coil index domestic, exw Italy, €/tonne MB-STE-0028 – Steel hot-rolled coil index domestic, exw Northern Europe, €/tonne These prices are a part of the Fastmarkets steel package. For more information or to provide feedback on the delayed publication of this price or if you would like to provide […]
Southern Yellow Pine (SYP) is moving to the beat of its own drum. While lumber markets have historically moved in tandem, recent data shows SYP prices are decoupling from other species like Spruce-Pine-Fir (SPF). In a post-pandemic market, the correlation between SYP and SPF has plummeted from over 80% to nearly zero. This fundamental shift underscores the growing need for a dedicated hedging tool for the world's fastest-growing lumber market.
The decision follows a consultation period that started on October 28 and ended on November 25. The price assessments in question are:MB-STS-0008 Stainless steel scrap 18/8 solids, import, cif main European port, € per tonneMB-STS-0009 Stainless steel scrap 18/8 turnings, import, cif main European port, € per tonneMB-STS-0261 Stainless steel scrap 316 solids, import, cif main European port, € per […]
Fastmarkets has launched DDP import steel price assessments for steel hot-rolled, cold-rolled and hot-dip galvanized coil in Northern Europe and in Southern Europe, effective Wednesday November 26, ahead of the launch of the EU’s Carbon Border Adjustment Mechanism (CBAM).
Fastmarkets wishes to clarify that it will continue to include index-linked trades using the Singapore Exchange (SGX) iron ore derivative forward curves in iron ore indices, effective December 1 2025.